INDUSTRIAL AEROSOLS
MRO 1009 - 123 DL
| Brand | MRO Infra |
|---|---|
| Application | Contacts |
| Industries | Civil, Electrical, Instrumentation, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Solid lubricants and additives in inorganic binder and solvent |
| Appearance | Thin liquid |
| Color | Gray black |
| Odour | Mild solvent |
| Density | 1.0 -1.1 g/cc |
| Propellant | Non CFC |
| Solvent type | Non chlorinated |
| Service temperature | -180 to +450 (up to +630 in areas with restricted air access) , °C |
| Curing period | Air dries to touch in 1 minute at room temperature and completely in 5 minutes |
| Recommended film thickness | 5-20 |
| Radiation resistance, rad | 109 |
| Special properties | Excellent adhesion on all types of surfaces. |
MRO 1013 - AL KOTE
| Brand | MRO Infra |
|---|---|
| Application | |
Civil, Electrical, Instrumentation, Mechanical | |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Single pack system |
| Appearance | Paint type liquid |
| Color | Bright Silver |
| Odour | Solvent |
| Specific Gravity | Lesser than 1.0 gm/cc |
| Flash Point | -18°C |
| Operating Temperature | Up to 600°C |
| Coverage | 2-3 m2/can |
| Film Thickness | 20-40 µm |
| Drying Time -To Touch | 10-15 minutes |
| Drying Time -To Handle | 2-3 hours |
| Resin type | Silicone |
| Complete Cure | 8-12 hrs |
| Pigment | Aluminium |
MRO 1019 - ANTISIEZE COMPOUND
| Brand | MRO Infra |
|---|---|
| Application | Bolts, Cylinder Heads, Flanges, High Temperature Connections, Manhole Lugs, Stud Assemblies |
| Industries | Civil, Electrical, Instrumentation, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Solid lubricants and additives in inorganic binder and solvent |
| Appearance | Dry paint type liquid (on curing), Thin Liquid (as supplied) |
| Odour | Mild solvent |
| Propellant | Non CFC |
| Color | Grey – black |
| Solvent type | Non chlorinated |
| Density | 1.05 (g/cc) |
| Service temperature | -180°C to +450°C (up to +630° C in areas with restricted air access) |
| Curing period | Air dries to touch in 1 minute at room temperature and completely in 5 minutes |
| Recommended film thickness | 5-20 |
| Special properties | Excellent adhesion on all types of surfaces. |
MRO 1021 - BATTERY TERMINAL KLEANER
| Brand | MRO Infra |
|---|---|
| Application | Battery brackets, Battery casings, Battery terminals, Cable connectors |
| Industries | Electrical, Instrumentation |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Aqueous cleaner |
| Appearance | Quick breaking foaming |
| Odour | Pleasant solvent |
| Color | Yellowish |
| Specific Gravity | ~1.00 gm/cc |
| Flash Point | -18°C |
| Boiling Point (initial) | +95°C |
| Solubility | In water |
| Vapour Density | Not determined |
| PH | ~8.5 |
| Evaporation Rate | That of water |
| Propellant | Non CFC |
MRO 1022 - BATTERY TERMINAL KOTE
| Brand | |
|---|---|
| Application | Battery hold-downs and casings, Battery posts, Battery terminals |
| Industries | |
| Available Packaging | |
| Packaging Type | |
| Shelf Life | |
| Caution | |
| Type_ | |
| Appearance | |
| Odour | |
| Color | |
| Specific Gravity | |
| Flash Point | |
| Propellant | |
| Temperature Range | |
| Vapour Pressure (air=1) | |
| Salt Spray Test | |
| Special properties | Highly resistant to high humidity, moisture, water, chemicals, salt spray, oxidation. |
| Benefits | Suited for long term heavy duty automotive & industrial rust proofing applications |
| Meets or Exceeds Specifications |
MRO 1020 - BRITE GALVA
| Brand | MRO Infra |
|---|---|
| Application | Bolts, Cylinder Heads, Flanges, High Temperature Connections, Manhole Lugs, Stud Assemblies |
| Industries | Civil, Electrical, Instrumentation, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Solid lubricants and additives in inorganic binder and solvent |
| Appearance | Dry paint type liquid (on curing), Thin Liquid (as supplied) |
| Odour | Mild solvent |
| Propellant | Non CFC |
| Color | Grey – black |
| Solvent type | Non chlorinated |
| Density | 1.05 (g/cc) |
| Service temperature | -180°C to +450°C (up to +630° C in areas with restricted air access) |
| Curing period | Air dries to touch in 1 minute at room temperature and completely in 5 minutes |
| Recommended film thickness | 5-20 |
| Special properties | Excellent adhesion on all types of surfaces. |
MRO 1027 - BUSBAR KOTE LT
| Brand | MRO Infra |
|---|---|
| Application | Bus Bars, Protects electrical connections on wire, cables, alarms, electronics, Sub Stations, Transmission Towers, Switchgear panels support structure guards against animal caused flashovers |
| Industries | Civil, Electrical, Instrumentation, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Fast air drying coating |
| Adhesion | Excellent |
| Colour Fastness | Excellent |
| Solvents | Aliphatic, Ketones |
| Percent Solids (By Weight) | 18 minimum |
| Odour | Solvent |
| Appearance | Glossy Brown finish |
| Specific Gravity | 0.90 – 1.05 gm/cc @ 20°C |
| Flash Point | -18°C |
| Drying Time -To Touch | 10-15 minutes |
| Drying Time -To Handle | 30-45 minutes |
| Drying Time – Full Cure | 24 hours |
| Drying Time – Recoating Period | After drying to handle |
| Corrosion Resistance Test | Passes |
| Resistant to | Mineral oils, mineral spirits, gas, water, humidity |
| Temperature Range | -40°C to +180°C |
| Evaporation Rate | > n,butyl acetate (=1) |
| Vapour Pressure (air=1) | >air |
| Dry Film Thickness (DFT) | 25 microns per coat |
| Stability | Stable under normal conditions |
| Conditions To Avoid | Keep away from heat and sources of ignition |
| Chemical Incompatibility | Strong oxidizing agents, alkalis, acids |
| Propellant | Hydrocarbon |
MRO 1026 - CHEMPROOF
| Brand | MRO Infra |
|---|---|
| Application | Acid fume proof roofing, Boiling water tanks, Buried tanks and vessels, Offshore risers, piles, Pipe lines, fittings, valves, load cells, Solvent extraction systems |
| Industries | Civil, Electrical, Instrumentation, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Fast air drying coating |
| Adhesion | Excellent |
| Colour Fastness | Excellent |
| Solvents | Aliphatic, Ketones |
| Percent Solids (By Weight) | 18 minimum |
| Odour | Solvent |
| Appearance | Glossy Brown finish |
| Specific Gravity | 0.95 – 1.05 gm/cc |
| Flash Point | -18°C |
| Drying Time -To Touch | 10-15 minutes |
| Drying Time -To Handle | 30-45 minutes |
| Drying Time – Full Cure | 24 hours |
| Drying Time – Recoating Period | After drying to handle |
| Corrosion Resistance Test | Passes |
| Resistant to | Mineral oils, mineral spirits, gas, water, humidity |
| Temperature Range | -40°C to +180°C |
| Evaporation Rate | > n,butyl acetate (=1) |
| Vapour Pressure (air=1) | >air |
| Dry Film Thickness (DFT) | 25 microns per coat |
| Stability | Stable under normal conditions |
| Conditions To Avoid | Keep away from heat and sources of ignition |
| Chemical Incompatibility | Strong oxidizing agents, alkalis, acids |
| Propellant | Hydrocarbon |
MRO 1004 - ELECTRIK MOTOR KLEANER
| Brand | MRO Infra |
|---|---|
| Application | Bearings, Busbars, Circuit breakers, Electrical equipment, Gears, Generators, Motors, Plugs and sockets, Switch gears, Terminals, Transformers, Tuners |
| Industries | Electrical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Heavy duty cleaner & degrease |
| Appearance | Liquid |
| Color | Clear |
| Odour | Mild |
| Specific Gravity | 1.44 -1.64 g/cm3 @ 20°C |
| Flash Point | None |
| Boiling Point (initial) | 120°C |
| Vapour Density | >air |
| Percent Volatile | 100 % |
| Evaporation Rate | Fast |
| Dielectric Strength | 22 kv (ASTM D 877), 37.5 KV (ASTM D 877) |
| Kauri Butanol Value (KB) | 93 (ASTM D 1130) |
| Surface Tension | 32 dynes/cm |
| Propellant | CO2 |
MRO 1001 - ELEKTRICIAN
| Brand | MRO Infra |
|---|---|
| Application | Alarm systems, Circuit breakers, Communication assemblies, Controls, Electrical connectors, Electronics, Generators, Instruments, Motors, Relays, Starters, Switch gears, Transformers |
| Industries | Electrical, Instrumentation |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Color | Amber |
| Specific Gravity | 0.83 @ 20°C |
| Flash Point | <0°C |
| Boiling Point (initial) | +180°C |
| Evaporation Rate | <n-butylacetate |
| Vapour Density | >air |
| Type Of Film | Non drying Oil |
| Film Thickness | 0.02-0.07 mm |
| Solubility | Nil in water |
| Corrosion Protection | Indoors for up to 9 months |
| Water Displacement Test | Pass |
| Dielectric Strength | 31 kv |
| Suitable For | All metals |
| Propellant | CO2 |
MRO 1024 - H2O DISPLAZER
| Brand | MRO Infra |
|---|---|
| Application | Busbars, Circuit breakers, Electrical connectors, Fuses, Generators, Ignition systems, Motors, Potentiometers, Relays, Rheostats, Solenoids, Starters, Switch gears, Transformers |
| Industries | Electrical, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Electrical strength multifunctional lubricant, displaces moisture and corrosion inhibitor |
| Appearance | High Gloss |
| Color | Reddish brown, translucent |
| Odour | Mild petroleum |
| Specific Gravity | 1.20-1.50 gm/cc (heavier than water) |
| Flash Point | None |
| Propellant | CO2 |
| Evaporation Rate | Very fast (n, butyl acetate = 1) |
| Vapour Density | Heavier than air |
| Vapour Pressure (air=1) | >air |
| Type Of Film | Thin, non drying |
| Dielectric Strength | 31 kv |
| Water Displacement Test | Pass |
| Solubility | Nil in water |
| Special properties | Durable in humid or corrosive atmospheres; guards metal against water, water vapour, chemical fumes, dust and abrasive matter |
| Suitable For | All metals |
MRO 1018 - KARBON KLEANER
| Brand | MRO Infra |
|---|---|
| Application | Bus Bars, Commutators, Contactors, Electric motors, Engines, Insulators, PCB, Relays, Spark Plugs, Varnishes |
| Industries | Electrical, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Cleaner |
| Appearance | Viscous Liquid |
| Odour | Solvent |
| Specific Gravity | 1.15 (@ 20°C) |
| Evaporation Rate | Faster than n-butyl acetate |
| Propellant | Non CFC |
| Color | Milky White |
| Flash Point | -18°C |
| Solubility | Nil in water |
| Vapour Density | >air (air =1) |
| Cure | Non-curing |
MRO 1023 - KLEAR KOTE
| Brand | MRO Infra |
|---|---|
| Application | Electrical equipment, Electronic equipment, Fixtures, Printed circuit boards, Transformers |
| Industries | Civil, Electrical, Instrumentation, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Liquid |
| Appearance | High Gloss |
| Color | Clear |
| Odour | Mild petroleum |
| Specific Gravity | 0.85-0.98 |
| Flash Point | -18°C |
| Propellant | Non CFC |
| Temperature Range | -65°C to +130°C |
| Resin type | Acrylic |
| Dielectric Constant | 2.5 at 100KHz |
| Coverage | 2-3 m2/can |
| Drying Time – Full Cure | 15 hrs. |
| Drying Time -To Touch | 5 min. |
| Drying Time -To Handle | 10 min. |
| Drying Time – Recoating Period | 30 min. |
MRO 1002 - OFFLINE KLEANER
| Brand | MRO Infra |
|---|---|
| Application | Alarm systems, Circuit breakers, Contacts, Electrical connectors, Electromechanical assemblies, Generators, Laboratory and test equipments, Plugs and sockets, Printed circuit boards, Sensors, Switches, Terminals |
| Industries | Electrical, Instrumentation |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Heavy duty cleaner & degrease |
| Appearance | Liquid |
| Color | Clear |
| Odour | Mild petroleum |
| Specific Gravity | 0.78 @ 20°C |
| Flash Point | -17°C (TCC) ASTM D 56 |
| Boiling Point (initial) | 60°C |
| Vapour Density | >1 (air = 1) |
| Percent Volatile | 100 % |
| Evaporation Rate | very fast |
| Solubility | Negligible in water |
| Dielectric Strength | 22 kv (ASTM D 877) |
| Kauri Butanol Value (KB) | 31 (ASTM D 1130) |
| Propellant | CO2 |
MRO 1017 - PAINT REMOVER
| Brand | MRO Infra |
|---|---|
| Application | Adhesives, Carbon Deposits, Grease, Lacquers, Oil, Paint, Varnishes |
| Industries | Civil, Electrical, Instrumentation, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Cleaner |
| Appearance | Viscous Liquid |
| Odour | Solvent |
| Specific Gravity | 1.05-1.25 (@ 20°C) |
| Evaporation Rate | Faster than n-butyl acetate |
| Propellant | Non CFC |
| Color | Milky White |
| Flash Point | -18°C |
| Solubility | Nil in water |
| Vapour Density | >air (air =1) |
| Cure | Non-curing |
MRO 1010 - PENOIL
| Brand | MRO Infra |
|---|---|
| Application | Battery cables, Bearings, Chains, Contacts, Conveyors, Corroded fasteners, Equipment disassembly, Hinges, Nuts & bolts, Pipes & fittings, Pulleys, Pumps, Screws, Valves |
| Industries | Civil, Electrical, Instrumentation, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Ultra low viscosity, light weight, penetrating oil |
| Appearance | Thin liquid |
| Base | Highly refined paraffinic oil, special petroleum distillates, additives |
| Color | Dark amber |
| Odour | Pleasant, mild vanilla |
| Film Type | Thin, non drying |
| Physical State | Aerosol container |
| Active Ingredients, % by wt. | 74-76 |
| Specific Gravity | 0.70 @ 20°C |
| Flash Point | -18°C (Solvent) |
| Boiling Point (initial) | NA |
| Pour point | NA |
| Evaporation Rate | Faster than n-butyl acetate |
| Conditions To Avoid | Keep away from heat and sources of ignition |
| Chemical Incompatibility | Strong oxidizing agents, alkalis, acids |
| Hazardous Polymerization | No |
| Vapour Pressure (air=1) | >air |
| Spreadability Test | Excellent |
| Capillary Penetration Test | Excellent |
| Nail Climb Penetration Test | Excellent |
| Effect on Enamel or Paint | Does not affect (MIL-C-23411) |
| Water Displacement Test | Passes (MIL-C-23411) |
| Safety Norms | Does not contain any human carcinogenic ingredients |
| Solubility | Nil in water |
| Propellant | Hydrocarbon |
| Surface Tension | 44 Dyne/cm |
| Internal Tension | 36 Dyne/cm |
MRO 1003 - SAFETY SOL
| Brand | MRO Infra |
|---|---|
| Application | Alarm systems, Circuit breakers, Contacts, Electrical connectors, Electromechanical assemblies, Generators, Laboratory and test equipments, Plugs and sockets, Printed circuit boards, Sensors, Switches, Terminals |
| Industries | Electrical, Instrumentation |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Heavy duty cleaner & degrease |
| Appearance | Liquid |
| Color | Clear |
| Odour | Mild petroleum |
| Specific Gravity | 0.78 @ 20°C |
| Flash Point | -17°C (TCC) ASTM D 56 |
| Boiling Point (initial) | 60°C |
| Vapour Density | >1 (air = 1) |
| Percent Volatile | 100 % |
| Evaporation Rate | very fast |
| Solubility | Negligible in water |
| Dielectric Strength | 22 kv (ASTM D 877) |
| Kauri Butanol Value (KB) | 31 (ASTM D 1130) |
| Propellant | CO2 |
MRO 1015 - SS KOTE
| Brand | MRO Infra |
|---|---|
| Application | Bench top splash guards, Contact tips, Metal moulds, Mig and Tig tips, Resistance welding tips |
| Industries | Civil, Electrical, Instrumentation, Mechanical |
| Available Packaging | 500ml |
| Packaging Type | Aerosol Can |
| Shelf Life | 24 months |
| Caution | Flammable |
| Type_ | Single pack system |
| Appearance | Paint type liquid |
| Color | Silver gray |
| Odour | Solvent |
| Specific Gravity | Less than 1.00 gm/cc |
| Flash Point | -18°C |
| Pigment | 100% SS 316L |
| Drying Time -To Touch | 10 minutes |
| Drying Time -To Handle | 20 minutes |
| Complete Cure | 12 hrs |
| Coverage | 2.5 m2/can |